OpenWRT OpenVPN
1- Go to System->software and install luci-app-openvpn
2- Upload the WeVPN OpeVPN config in the "OVPN configuration file upload"
Note: Verify that the folder "/etc/openvpn" exists in your router, otherwise the upload will fail.
3- Edit the new OpenVPN instance
Add the OpenVPN credentials displayed in your WeVPN dashboard config generator in the bottom area.
4- Enable the OpenVPN instance
5- Firewall settings
Click on Network in the top bar and then on Interfaces to open the interfaces configuration page.
Click on button Add new Interface…
Fill the form with the following values: name =
tun0, Protocol = Unmanaged, Interface = tun0. Then click on Create Interface.-
Edit the interface.
-
In panel General Settings: unselect the checkbox Bring up on boot.
-
In panel Firewall Settings: Assign firewall-zone to
wan. -
Click on Save and Apply the new configuration.
-
Reboot the router.
6- If you want to use our WePlay feature, our DNS servers must be used. Set our DNS server ip in your main interface
